MADRIX Forum

how do i wire the led strip lights to the dmx out on the artnet node 8 dmx

there is 3 pins on the artnet dmx

pin one = ground
pin two = +data
pin three = -data

on the led strip there is

red = +5volt
black = ground

what are the blue and green? data and clock wired to on the artnet pins

chuck

Hello chuck-kern,
Welcome to the MADRIX forum.
.
When you want to connect a DMX interface like an Art-Net node to a desired fixture you have to make sure that the fixture is able to receive DMX signals.
The described LED stripe seems not to be able to receive DMX signals.
.
But some of such LED stripes can be controled via DMX when you will used an additional DMX to SPI converter.