Page 1 of 1
Single channel(mono) LED and RGB LED together
Posted: Tue Apr 28, 2015 11:47 am
by ricovijay
hi
i want to control single channel LED and RGB (three Channel ) together ..
if add together cant able to control both it means all RGB Channels become White
Please Help me
Thanks
Re: Single channel(mono) LED and RGB LED together
Posted: Tue Apr 28, 2015 1:32 pm
by Fritzsche
Hi!
.
1)
In MADRIX 3, please open the Patch Editor (menu Preferences > Patch Editor) and a new window will open.
.
2) Then, go to Edit > Matrix Size... and another small window opens. Make sure that you set Color Depth to 3!. This should solve the issue.
.
Please let me us if that helps! Thank you!
Re: Single channel(mono) LED and RGB LED together
Posted: Wed Apr 29, 2015 6:37 am
by ricovijay
Thanks Many
Re: Single channel(mono) LED and RGB LED together
Posted: Wed Apr 29, 2015 6:38 am
by ricovijay
Hi
Is Thr any possible to load cue list remotely ?
regards
vijay
Re: Single channel(mono) LED and RGB LED together
Posted: Thu Apr 30, 2015 2:04 pm
by Guertler
Hello ricovijay,
.
When you are using a PLEXUS in stand alone mode you can control the trigger to play the next scene or to play a desired scene remotely.
In the following link you can learn how you can control the PLEXUS in stand alone mode remotely.
http://help.madrix.com/m3/html/plexus/i ... ntrol.html
.
When you want to control the MADRIX Cue List in "Live Mode". That means MADRIX is running and the DMX data will be send via the PLEXUS. You can also use one port of the PLEXUS to control the MADRIX Cue List remotely. In the following link you learn how you can work with the Remote Editor in MADRIX:
http://help.madrix.com/tutorials/html/i ... mx_in.html