Page 1 of 1
Speedmaster don't run with SCE-Pulse
Posted: Thu Oct 09, 2008 11:05 am
by dieter
The speedmaster of beta2 don't running with the pulse-effect.
If speed in range 1 to 10 or -1 to -10 the pulse running in same speed.
In range of 1...0...-1 pulse make black, don't strobe.
I don't can use speedmaster with strobe to change speed of them.
Posted: Fri Oct 10, 2008 7:52 am
by Hertel
Thank you Dieter. We will fix this bug a.s.a.p. ... In a few days you can download the 2.5 release version with working speedmasters in the pulse effect.
Posted: Mon Nov 03, 2008 1:43 pm
by dieter
I have download version 2.5 with date 2008/10/21 and tested.
Okay, the speedmaster pulse is a little bit better, but not really good.
In range speedmaster of 2.5 to -2.5 its okay. but in other range from
-/+2.5 to -/+10.0 no speed higher.
but
if RESET button pressed of strobe effect, the speed works fine !
IMO thats not right.
Posted: Mon Nov 03, 2008 9:26 pm
by Wissmann
Yes it´s true, there is something wrong.
We fixed the part how the SCE Pulse/Strobe effect reacts on different speedmaster values but as like as you describe the framevalues are different after using the Reset Button. We will check this. The next release V2.5a is not far away because of some other bugfixes.
Posted: Wed Nov 26, 2008 11:10 am
by Wissmann
Was fixed in version MADRIX V2.5a (2.5.1.1).
.
Please keep in mind the maximum refresh rate for effects are 50 Hz, therefor regardless the speedmaster no more than 25 Hz (50 times on off) are possible for the Stroposcope.
Posted: Thu Dec 04, 2008 2:09 pm
by dieter
running fine,
thanks