MADRIX Forum

Hi There,

I'm experianceing some problems with linking Madrix Basic with Wysiwyg R22.

Afther installing the Driver, Madrix doesn'r apear in the console list in Wysiwyg.

I think the driver is active, because the icon apears in the taskbar. The port on the computer running in wysiwyg and the computer running madrix is the same.

When the icon is active on the pc running wysiwyg, i can also see it in the visualizer tab in the devicemanager from madrix.



Can someone tell me how to fix this problem.

Greetz,
Jurgen

Hi Jurgen,
.
i am not sure if it is allready possible with R22 to connect with MADRIX. Maybe R23 is at least necessary. On Monday i can ask my college which have done this for MADRIX.
.
Did you read the help manual about connecting MADRIX with WYSIWYG?
http://help.madrix.com/hidd_device_page_wysiwyg.html

Hi Wissmann,

I followed the manual step by step, that didn't do the trick. Maybe it's only from R23

Was your college familiar with the problem?

Hi Jurgen,
.
good and bad news.
My college means MADRIX works with R22 but you need one aditonal file from CAST (the manufactor of WYSIWYG) which you have to copy to your WYSIWYG directorie, so the WYSIWYG software offer MADRIX for you.
.
We finished the WYSIWYG support not so far away (in 2009) therefor R22 do not know about MADRIX and therefor you need this extra file from CAST.
.
I hope this is not to bad for you.

Hi Wissmann,

let's say this is good news, but one question:

can you tell me whitch the file is i need to make it work?

I allready send an email to CAST and hopefully i can give you more detailed informations soon.

Thanks

You have mail