MADRIX Forum • Trouble with sACN, 3.6i.
Page 1 of 1

Trouble with sACN, 3.6i.

Posted: Tue Apr 16, 2019 4:13 pm
by Enfrize
Hello!
We have a trouble, It seems we found new bug: it`s happened when we used Streaming-CAN. When light-led are changing fast (20-30 times per second) then Madrix forming the sACN package takes half from old one, and another one from new.
For example: strobe red-blue-red-blue-red
As result half leds are red another half are blue.
Ver. 3.6i

Re: Trouble with sACN, 3.6i.

Posted: Wed Apr 17, 2019 12:48 pm
by Fritzsche
Hi,

Thank you for your post!

Could you please answer a few questions:
- Do you see this behavior when using lower frame rates (In the MADRIX Software, please go to menu Preferences > Device Manager... > DMX Devices and set the Frame Time to 67 / FPS = 14.9)?
- Do you see this on one panel or several panels? Is it the same on the panels or different?
- Do you see it on different universes or the same universe?

I am looking forward to hearing from you.
Thank you!