No Live Preview With Activated License
Posted: Mon Oct 12, 2020 6:54 pm
Hello, I have a MADRIX key inserted and have already activated it with the code and everything. I'm outputting DMX via SACN and I get output when I highlight the universe. However, there is no live preview in the middle as if I haven't activated MADRIX. My MADRIX status under My Licenses says: Available: 0 (1)
Update: I created a new setup from scratch and it began outputting but after some time it once again stopped. The only way to keep using the software is to create a new setup every 15 minutes.
Seems like it immediately stops outputting when I connect the MA2 as a remote even though I have the correct settings. MANET is in same network IP setting, Universe in MA2 200.001, Start/End Uni in MADRIX 200-200, Start address in Device Manager, 1, remote enabled, correct profile. Yet as soon as I select it it shuts off and wont respond in ma2.
Update: I created a new setup from scratch and it began outputting but after some time it once again stopped. The only way to keep using the software is to create a new setup every 15 minutes.
Seems like it immediately stops outputting when I connect the MA2 as a remote even though I have the correct settings. MANET is in same network IP setting, Universe in MA2 200.001, Start/End Uni in MADRIX 200-200, Start address in Device Manager, 1, remote enabled, correct profile. Yet as soon as I select it it shuts off and wont respond in ma2.