Page 1 of 1
RGB Led Strips Connecting to DMX512 Controller
Posted: Wed Dec 01, 2010 8:19 am
by mmtlfans
Hi guys, I just got my order delivery this morning. I bought two tapes of rgb led strips, tri-chip rgb smd leds, 5 meters, one power supply 240v to 12v dc and one dmx decorder and a dmx100 master controller with remote.
Here is the rgb led strip I bought
They say it can achieve millions of colors and 256 grey levels, but it is the first time for me to use dmx controller with rgb led strips. Can anyone give any suggestions ? I appreciate it.
Re: RGB Led Strips Connecting to DMX512 Controller
Posted: Wed Dec 01, 2010 9:34 am
by Wissmann
Hi,
you like to control this with MADRIX?
Does this DMX Controller has a dmx Input?
.
If you like to control LED´s with MADRIX by DMX512 it is necessary to assign a dmx address to the LED controller so MADRIX can address/control it.
Re: RGB Led Strips Connecting to DMX512 Controller
Posted: Wed Dec 08, 2010 11:05 pm
by neilric99
One group who have done quite a lot of work with these RGB strips is
http://www.auschristmaslighting.com, they have a great forum and are on the bleeding edge of the RGB technology for christmas lighting displays.
I personally have 1500 RGB 8mm pixels connected to 8 DMX to pixel controllers and being driven in matrix format via Madrix Basic.
Neil
mmtlfans wrote:Hi guys, I just got my order delivery this morning. I bought two tapes of rgb led strips, tri-chip rgb smd leds, 5 meters, one power supply 240v to 12v dc and one dmx decorder and a dmx100 master controller with remote.
Here is the rgb led strip I bought
They say it can achieve millions of colors and 256 grey levels, but it is the first time for me to use dmx controller with rgb led strips. Can anyone give any suggestions ? I appreciate it.
Re: RGB Led Strips Connecting to DMX512 Controller
Posted: Thu Dec 09, 2010 3:41 am
by jstjohnz
mmtlfans wrote:Hi guys, I just got my order delivery this morning. I bought two tapes of rgb led strips, tri-chip rgb smd leds, 5 meters, one power supply 240v to 12v dc and one dmx decorder and a dmx100 master controller with remote.
Here is the rgb led strip I bought
They say it can achieve millions of colors and 256 grey levels, but it is the first time for me to use dmx controller with rgb led strips. Can anyone give any suggestions ? I appreciate it.
You mention a "DMX Decoder", do you have a picture of that? To control these strips with Madrix you need a DMX 'dongle' that plugs into a USB port on your PC, then the other piece of hardware you need is hopefully what you are referring to as a DMX Decoder, that will convert the DMX data to the right format to drive your strings.
I am currently using Madrix to drive RGB pixels, feel free to PM me.