How to connect ma Dot2 to control intensity level of Madrix.
Posted: Wed Dec 15, 2021 8:35 pm
Recently set up Madrix, my LED responded to it. Just need tips on how to use my dot2 console to control the intensity of the lights. Thanks.
Hi brockburns94,
Welcome to the MADRIX Forum!
MADRIX 5 supports different possibilites for Remote Control, such as DMX-IN, Art-Net, sACN, MIDI, Remote HTTP.
Here you will find a list about all Remote Control options in MADRIX 5:
https://help.madrix.com/m5/html/madrix/ ... ntrol.html
Since you are using a Console, DMX-IN or Art-Net Remote should be most likely the way to go.
Here you can learn how control MADRIX 5 remotely using Art-Net or DMX-In Remote:
https://help.madrix.com/tutorials/m5/HT ... mx_in.html
https://help.madrix.com/tutorials/m5/HT ... t_net.html
https://youtu.be/A5LcxCqnOBs
I hope this helps you!