WS2811 WS2812 One working the other does not
Posted: Fri Dec 29, 2023 1:04 am
I have a mixture of WS2811 12V nodes and WS2812 12V strips. The HinksPix controller can run both strings in test mode, but Madrix will only output to the WS2811 12V nodes, with the strips totally dark. I've been using Madrix for 10 years and have an ultimate license, so it is not a firewall or network issue. I been using the generic RGB pixel in the patch, but I'm thinking that since these are strips of 30 pixels that they need some other protocol. Any help would be appreciated. Thanks