How to make spacing in between LED strips
Posted: Thu Aug 22, 2024 11:31 am
Hi guys.
I'm also a newbie here to madrix and just need help with a "simple" problem.
I am making an LED tunnel 10m long by 4m wide, the strips are running the length of the tunnel (600pixels) long, and I am going to put 12 strips in there which I am going to space out over 4m.
My question is, how do I set up the matrix to account for the space between the strips, which would be ruffly 35cm apart so my effects are not crushed.
Thank you.
I'm also a newbie here to madrix and just need help with a "simple" problem.
I am making an LED tunnel 10m long by 4m wide, the strips are running the length of the tunnel (600pixels) long, and I am going to put 12 strips in there which I am going to space out over 4m.
My question is, how do I set up the matrix to account for the space between the strips, which would be ruffly 35cm apart so my effects are not crushed.
Thank you.