MADRIX Forum • combining remote commands
Page 1 of 1

combining remote commands

Posted: Fri Feb 17, 2012 11:20 pm
by steve@eoslightmedia
Hello,

Is there a way to combine remote commands?

For example, I would like to combine commands like:

http://10.10.155.141/RemoteCommands/SetLayerA=2
http://10.10.155.141/RemoteCommands/Set ... pacity=255

Is there a formula I can use to combine several commands?

Thanks

Re: combining remote commands

Posted: Tue Feb 21, 2012 2:11 pm
by Fritzsche
Hi Steve,

I want to quickly inform you that the answer might take two more days. We will post a reply as soon as possible! Thanks.

Re: combining remote commands

Posted: Wed Feb 22, 2012 11:41 pm
by steve@eoslightmedia
thanks for looking in to this --
I am onsite programming now.

Re: combining remote commands

Posted: Fri Feb 24, 2012 2:07 pm
by Fritzsche
Hi Steve,

We had hoped to simply combine the two with an "&" command, but it is not possible. Even if it would be that simple, we would run into a much more severe problem. And that would be the missing priority settings. What I mean with that is that even though Opacity might be called as second funtion, it could end up being the first function called, because one function does not have a higher priority than the other function.
Thank you.