DMX Reset All
Posted: Tue Feb 21, 2012 2:58 pm
We have a challenge with our Madrix system.
We control it with DMX. The console we use is a Roadhog with our selfmade Universal Protocol personality.
We use many storages and layers. When we are programming our show, we use many layers at the same time.
When we clear the fixture, on the console, we would like to see, that from all layers in all storages the opacity goes to 0.
At this moment, only the active layer goes to 0.
Is there a possibility to do that thru DMX.
We hope anyone can help us with our problem.
We control it with DMX. The console we use is a Roadhog with our selfmade Universal Protocol personality.
We use many storages and layers. When we are programming our show, we use many layers at the same time.
When we clear the fixture, on the console, we would like to see, that from all layers in all storages the opacity goes to 0.
At this moment, only the active layer goes to 0.
Is there a possibility to do that thru DMX.
We hope anyone can help us with our problem.