MADRIX Forum • How to use Time Code??
Page 1 of 1

How to use Time Code??

Posted: Mon Jun 18, 2012 1:06 pm
by chen
I have several cues in cuelist.
I want play fifth cue at 9 o'clock for 15s and one to fourth cue loop play.
Could somebody tell me how to do that??THX

Re: How to use Time Code??

Posted: Mon Jun 18, 2012 1:30 pm
by Fritzsche
Hi chen!

1) Create your 5 Cues.
2) Assign a duration for Cue 1, 2, 3, and 4 using the column "Duration" via double-click. For example, enter 5s and press Enter.
3) Set "F.Cue" to "1" for Cue 4.
4) For Cue 5 - Double-click in the column "Time Code" and type in "9h" and press Enter.
5) For Cue 5 - Double-click in the column "Duration" and type in "15s" and press Enter.
6) Activate "System Time" in the section "Time Code" below.

Re: How to use Time Code??

Posted: Tue Jun 19, 2012 3:26 am
by chen
Thanks for your reply but i still have problem.
I want to play 1th-4th cue before 9 o'clock and then play 5th cue at 9 o'clock.
When i follow your steps and open system time then it will play 5th cue all the time.
What should i do ??

Re: How to use Time Code??

Posted: Tue Jun 19, 2012 9:11 am
by Fritzsche
Hi chen,

I have just tested it again and it works on my computer.
To help you further, can you please send your MADRIX Setup File (*.ms2) to info[at]madrix.com? In MADRIX, go to the menu "File" > "Save Setup As..." and save the file. Thank you.

Re: How to use Time Code??

Posted: Thu Jun 21, 2012 2:45 am
by chen
I try to plug key then it works find on my computer finally.
Thnaks for your reply.