Page 1 of 1
DVI output
Posted: Mon Dec 03, 2012 7:32 am
by anfrmite
Hello to everyone. This is my first post.
I have a doubt regarding the DVI output from Madrix. I am just wondering, where the DVI output from Madrix is obtained?. I understand that I need an appropiate DMX output device (like USB to DMX) to get the DMX output. What kind of supported cards/interfaces are needed to obtain the DVI output from Madrix? Thank you very much.
Regards.
Re: DVI output
Posted: Mon Dec 03, 2012 9:57 am
by Wissmann
The DVI output is always handled by your graphics adapter.
So with this you need a graphics card which offers two outputs, one for your monitor where you work with MADRIX and one more for the dvi output for your leds.
Re: DVI output
Posted: Mon Dec 03, 2012 8:38 pm
by anfrmite
Thank you for your reply.
I am installing a dual output video card (VGA and DVI) on my PC. So the setup I believe that I must have is as following:
I must connect my working monitor to the VGA output.
And I must connect the DVI output to the appropiate LED fixtures that support DVI.
Of course I need to configure in the Windows adapter card properties that I have two monitors now and to activate the second one.
Am I correct?
So my main question now, is that I do not find any menu, option, radio button, or selection box in Madrix, in which I could tell Madrix that I now have two monitors instead that one, and that the monitor "1" (as Windows did enumerate it), is the VGA normal monitor in which I work, and that the monitor "2" is the DVI monitor that is going to the LED fixtures that support DVI.
Thank you very much in advance for any help.
Regards.
Re: DVI output
Posted: Tue Dec 04, 2012 8:43 am
by Wissmann
Correct so far.
Next you have to open a dvi preview from the prview menu and setup the position of this external dvi preview to the second monitor.
Please read the manual about using dvi output.
http://help.madrix.com/hidd_user_interf ... tions.html