MADRIX Forum

this is a cool suggestion for you

I guess...

regards

Hello gabrielefx,
.
What a coincidence this week we have tested the Realizzer linked with MADRIX .
The Realizzer software can receive the data from MADRIX via Art-Net.
.
What you have to do is:
1.) In the Realizzer software you have to enable Art-Net as Input. Therefore start a project in Realizzer and go to "Input > DMX Input" and enable ArtNet.
.
2.) Now start MADRIX and go to the Art-Net Tab of the Device Manager ("Preferences > Device Manager"). You have to enable the Art-Net communication and then click "Find Auto". Now MADRIX will find the Realizzer 3D Art-Net nodes.
In the next step go to the "DMX Device" tab and enable the Realizzer 3D port to send DMX data.
.
Please note: If MADRIX cannot find the Realizzer 3D node in the Device Manager, please have a look at the "Network Settings" of the Realizzer software.
.
If you have any further questions, please do not hesitate to contact us again!
Thank you.