Speedmaster don't run with SCE-Pulse
Moderator: MADRIX Team
Speedmaster don't run with SCE-Pulse
The speedmaster of beta2 don't running with the pulse-effect.
If speed in range 1 to 10 or -1 to -10 the pulse running in same speed.
In range of 1...0...-1 pulse make black, don't strobe.
I don't can use speedmaster with strobe to change speed of them.
If speed in range 1 to 10 or -1 to -10 the pulse running in same speed.
In range of 1...0...-1 pulse make black, don't strobe.
I don't can use speedmaster with strobe to change speed of them.
I have download version 2.5 with date 2008/10/21 and tested.
Okay, the speedmaster pulse is a little bit better, but not really good.
In range speedmaster of 2.5 to -2.5 its okay. but in other range from
-/+2.5 to -/+10.0 no speed higher.
but
if RESET button pressed of strobe effect, the speed works fine !
IMO thats not right.
Okay, the speedmaster pulse is a little bit better, but not really good.
In range speedmaster of 2.5 to -2.5 its okay. but in other range from
-/+2.5 to -/+10.0 no speed higher.
but
if RESET button pressed of strobe effect, the speed works fine !
IMO thats not right.
Yes it´s true, there is something wrong.
We fixed the part how the SCE Pulse/Strobe effect reacts on different speedmaster values but as like as you describe the framevalues are different after using the Reset Button. We will check this. The next release V2.5a is not far away because of some other bugfixes.
We fixed the part how the SCE Pulse/Strobe effect reacts on different speedmaster values but as like as you describe the framevalues are different after using the Reset Button. We will check this. The next release V2.5a is not far away because of some other bugfixes.