MADRIX Forum

Hi Quinton,

1) "Ok got it, out of curiosity how many recordings (storage places) can i record to in the Auras?"
- The maximum number of recordings recordings depends on the storage capacity of the SD card.

2) "Also I assume each storage place will be triggered by a diff HTTP command?"
- Yes, you can assign a customized command, which triggers an action. The action could be for example a playback of a certain Cue.

Thanks Schulze, when you release the unit will i am guessing you will also be releasing full documentation for all HTTP commands?

Hi Quinton,

Yes, you will find all the necessary information in the manual. As I said before, you will be able to create customized HTTP commands, which are triggering certain "Actions".

The following Actions will be available:

• Cue - Calls a specific cue [requires a value to choose which cue].
  Next Cue - Skips to the next cue.
  Previous Cue - Skips to the previous cue.
  Play - Starts the playback.
  Pause - Halts the playback.
  Toggle Pause - Pauses the playback or starts it again; depending on and in contrast to the current status.
  Stop - Stops the playback entirely.
  Intensity - Sets the master brightness ranging from 0 to 255 [requires a value to choose which level].
  Speed Scaled - Sets the speed ranging from 1 to 1000 in % [requires a value to choose which level].
  Speed Direct - Sets the speed to the exact value that is received [requires a value to choose which level; up to 255].
  Intensity Group 1 - 8 - Controls the intensity groups ranging from 0 to 255 [requires a value to choose which level].
  Record - Starts the recording process.
  Speed Increment - Increases the speed ranging from 1 to 1000 in % [requires a value to choose which level].
  Speed Decrement - Decreases the speed ranging from 1 to 1000 in % [requires a value to choose which level].
  Intensity Increment - Increases the master brightness ranging from 1 to 255 [requires a value to choose which level].
  Intensity Decrement - Decreases the speed brightness from 1 to 255 [requires a value to choose which level].
  Intensity Group 1 - 8 Increment - Increases the group brightness ranging from 1 to 255 [requires a value to choose which level].
  Intensity Group 1 - 8 Decrement - Decreases the group brightness from 1 to 255 [requires a value to choose which level].

Thanks Schulze, i was just looking through the manual, with the http commands would it be possible to provide a little more information as to usage or examples/tutorials for this?

Hi Quinton,

We will add tutorials regarding this topic in the near future. HTTP remote allows you to trigger certain actions on the AURA(for example start the playback of the Cue List, start a recording, manipulate the intensity level, etc.) remotely (from a remote location) using a device, which needs to have network access to the AURA. This could be for example a computer.

There are some examples in the chapter "Remote Event Settings":
http://help.madrix.com/m5/html/madrix/i ... x_aura.htm