MADRIX Forum

Greetings Allard,

I am not from the support team, but I hope I am able to help.

There is a table in the end of that help page:

http://help.madrix.com/m3/html/madrix/index.html

Strangely enough, I am still unable to identify problem with LightJockey on or off. Sometimes both programs go along just fine, sometimes not. I will continue experimenting. However I was able to identify another problem, totally unexpected to me. With the PC configuration the dealer has sold to the...

No, the controller is conected to a USB port. That's why it's strange to me what might be causing the conflict

The switch is ZyXEL ES-105A v2 and nothing seems wrong with it. I haven't tested with another model, but soon will do. The last test showed that the problem, yet strange to me, might be from another program that is used for controling other devices - MAC Beams and CO2 jets. It's Martin's LightJockey...

Sorry for the late reply.

Madrix is 3.2

Direct IP is used for all universes.

After a fresh start of the computer it works as expected, but then some time passes and it stops, 5-10 mins, it's different every time.

Greetings Wissmann, my devices are only DMX. I have two 2 Colordreamer CD-NET A16 conected via LAN on one switch, controlling overall of 27 universes with 3D vertical tubes LEDWALKER and few DMX512 decoders DE8024. If by "main mix frequency" you're refering to the Main Mix in the Performan...

Hello, I want to consult about a possible bug with the master Blitz button. Sometimes it works as expected, but it is not a predictable behaviour. There are moments, when while mixing different programs from both sides and I try to use the button I can see the effect performing in the middle window ...

Yes, I tried the Fader tool, but still at some point I get the channels mixing and hitting unwanted values, so for now the other structures will be controlled with another software. Though I will continue experimenting when I have the time 8) So far I have managed to controll the RGB tubes and RGB l...

Also I saw a similar setup to the one I have with LED tubes and Beam300 moving heads in this video:
https://www.14dd5266c70789bdc806364df4586335-gdprlock/watch?v=oTQfpv9POp0

Although I am not sure if the beams are somehow controlled, or just are reacting to the patterns, send to the LED fixtures.

What do you think?

So I should rule out the laser, the beamers and the jets out of the equation? Interesting... That explains why I am not having problems controlling the RGB lines and only the other devices. I was thinking of the possibility to address their channels with the map and offsets. Should I try that? My ma...