Madrix 3.3a hangs when opening setup

This forum is assigned for bug reporting of Version 3.X. Please be as accurate as possible.

Moderator: MADRIX Team

Locked
viennaxmas
Posts: 18
Joined: Sat Nov 16, 2013 3:26 am

Madrix 3.3a hangs when opening setup

Post by viennaxmas »

I have experienced regular freezes of Madrix 3.3a under the following conditions:

1. Loaded a Setup using 32 Universes
2. Use the setup for a while
3. Open a setup containing 4 Universes (different than the ones before)
4. Madrix shows the Dialog confirming what to load (all boxes selected)
5. Madrix shows the "Open Setup" Spinner and get's stuck.

The only way to get out of this mode is to use the Windows Task Manager to end Madrix. If I exit Madrix and load either of the setups, everything works fine.
Fritzsche
Support
Support
Posts: 735
Joined: Mon Oct 05, 2009 5:26 pm
Contact:

Re: Madrix 3.3a hangs when opening setup

Post by Fritzsche »

Hi!
.
Thank you very much for this report!
.
Would it be possible for you to send the two MADRIX Setup files via e-mail to info[at]madrix.com?
.
We will test and check everything when we receive the files.
.
Thank you very much for your help!
viennaxmas
Posts: 18
Joined: Sat Nov 16, 2013 3:26 am

Re: Madrix 3.3a hangs when opening setup

Post by viennaxmas »

Thank you, just sent the files.
Fritzsche
Support
Support
Posts: 735
Joined: Mon Oct 05, 2009 5:26 pm
Contact:

Re: Madrix 3.3a hangs when opening setup

Post by Fritzsche »

UPDATE: This issue could be quickly resolved by MADRIX support by saving the Setup files anew on a different system.
Locked