Fixture profile sharing
Moderator: MADRIX Team
-
TheGrindUk
- Posts: 1
- Joined: Wed Dec 23, 2015 12:30 am
Fixture profile sharing
Does anybody in the Madrix community have a fixture profile for the American DJ LED PIXEL 10C in 480Ch DMX Mode?
Once the profile is created the 3 10c's with 30 pixel tube 360's should provide me with an impressive ceiling feature especially when they've been mapped using Madrix
Thanks in advance
Kev
The Grind Uk
Once the profile is created the 3 10c's with 30 pixel tube 360's should provide me with an impressive ceiling feature especially when they've been mapped using Madrix
Thanks in advance
Kev
The Grind Uk
Re: Fixture profile sharing
Hi Kev,
.
For now, it should also work when using 10 times the fixture profile 'EUROLITE LED Pixel Tube 360°/ 1m' per LED Pixel 10C as the DMX channels are then assigned in the same way. The DMX start addresses of the tubes would be the following per DMX universe:
Tube 1 - 1
Tube 2 - 49
Tube 3 - 97
Tube 4 - 145
Tube 5 - 193
Tube 6 - 241
Tube 7 - 289
Tube 8 - 337
Tube 9 - 385
Tube 10 - 433
.
Thanks.
.
For now, it should also work when using 10 times the fixture profile 'EUROLITE LED Pixel Tube 360°/ 1m' per LED Pixel 10C as the DMX channels are then assigned in the same way. The DMX start addresses of the tubes would be the following per DMX universe:
Tube 1 - 1
Tube 2 - 49
Tube 3 - 97
Tube 4 - 145
Tube 5 - 193
Tube 6 - 241
Tube 7 - 289
Tube 8 - 337
Tube 9 - 385
Tube 10 - 433
.
Thanks.