Nebula Firmware Update

[nandoo]

Hello everyone,

my Firmware Version is 1.0.6127

my Question, will there be an update soon, to support the SK6812 ?

It works so far with either the WS2812 at 800kHz or the SM16703 at 800kHz

as discussed in this thread:
https://cpldcpu.wordpress.com/2016/03/0 ... t-rgb-led/

the timings are better in the SK6812, plus the PWM f is higher, it might lead to less flickering results.


thanks
best regards,
nandoo

[Fritzsche]

Hi nandoo,
.
The SK6812 is already supported with the latest firmware updates, which are versions 1.1.6147 and 1.1.6168.
.
Please download MADRIX 3.6a and update the firmware of your NEBULA in order to access the new LED protocol.
.
Always make sure to keep up with the latest updates by using these sources:

http://www.madrix.com/en/home/products/ ... notes.html

http://help.madrix.com/m3/html/madrix/h ... ebula.html

All the best!