Support BACnet?

[Copper]

Not sure Madrix Product support BACnet protocol?

[Guertler]

Hello Copper,
Welcome to the MADRIX forum.
.
It is not possible to control BACnet via MADRIX directly. But there are some converters from Art-Net to BACnet on the market. Maybe this will help you.

[Copper]

Thanks the information.

Madrix --> bacnet (it's not possible)

Barnet --> Madrix (is it possible to control by bacnet? Switch on off the light through Bacnet and feeding time sequence)

[Guertler]

Hello Copper,
.
As I wrote in my first post. It is not possible to create a direct communication between the MADRIX and the BACnet devices.
But for MADRIX output you can use:
MADRIX -> Art-Net to BACnet converter -> BACnet device
.
For DMX Input to control MADRIX remotely you have to use:
BACnet device -> BACnet to Art-Net converter -> MADRIX