Controlling alternate DMX fixtures

Moderator: MADRIX Team

Locked
Lorin Sly
Posts: 1
Joined: Sat May 12, 2018 4:23 am

Controlling alternate DMX fixtures

Post by Lorin Sly »

Hello,

I have a client that would like to have a fiber optic drape as part of their display. The unit is a Martin Rush FiberSource 1 http://www.martin.com/en-us/product-det ... ersource-1. It has 5 channels of control, and is a DMX fixture. I'm wondering if it is possible to create a profile for this fixture. Or perhaps just a 5 channel fixture in Madrix that I can set the individual parameters on via the programmer?

Thanks!

Lorin Sly
Fritzsche
Support
Support
Posts: 735
Joined: Mon Oct 05, 2009 5:26 pm
Contact:

Re: Controlling alternate DMX fixtures

Post by Fritzsche »

Hi Lorin,

I am sorry, but it does not make much sense to control this with the MADRIX Software.
The fixture simply does not allow full control of single color channels, i.e. pixel mapping.

If you have only one unit, you could use the DMX Fader Tool (menu 'Tools'), since it allows control of up to 12 individual channels.

Thanks!
Locked