Problem lsd-100 and Madrix
Moderator: MADRIX Team
Problem lsd-100 and Madrix
Hello.
I have weird problem when i try to use madrix to trough led show t9. Everything works perfectly and i have been reading every topics here, but one very strange problem appears when i go to the device manager - set dvi devices - add new device, i click eurolite T9 and then normally confiqure eurolite t9 and click ok. When i push ok a weird color tube appears to lsd-100 and the tube is rotates. Madrix output screen is black, and still the tube is in the screen. I can use the madrix normally but the color tube is all the time in the screen. It goes away when i shut madrix off.
I dry to do everything.
I hope somebody understand what i mean.
Sakke Salonen
S-Tech Oy
I have weird problem when i try to use madrix to trough led show t9. Everything works perfectly and i have been reading every topics here, but one very strange problem appears when i go to the device manager - set dvi devices - add new device, i click eurolite T9 and then normally confiqure eurolite t9 and click ok. When i push ok a weird color tube appears to lsd-100 and the tube is rotates. Madrix output screen is black, and still the tube is in the screen. I can use the madrix normally but the color tube is all the time in the screen. It goes away when i shut madrix off.
I dry to do everything.
I hope somebody understand what i mean.
Sakke Salonen
S-Tech Oy
Re: Problem lsd-100 and Madrix
Hello again.
Additional information about the problem.
When i open the madrix software, it automaticly open some pattern in dvi output (i can see it in dvi preview window). And when i add my t9 in the dvi devices the pattern automaticly shows in my screen. I can use madrix normally but the pattern is all the time in the screen and i cant get it off.
Question how i can get that away?
Sakke Salonen
Additional information about the problem.
When i open the madrix software, it automaticly open some pattern in dvi output (i can see it in dvi preview window). And when i add my t9 in the dvi devices the pattern automaticly shows in my screen. I can use madrix normally but the pattern is all the time in the screen and i cant get it off.
Question how i can get that away?
Sakke Salonen
Re: Problem lsd-100 and Madrix
Hi!
Sakke, which MADRIX KEY do you own?
The "problem" you are describing is not a real problem. This rotating tube across the screen is our DEMO mode of the software. At the same time it is our software protection.
When you connect a purchased MADRIX KEY with DVI output, the cross will disappear. As long as you are running the demo mode, it will stay.
Thanks!
Sakke, which MADRIX KEY do you own?
The "problem" you are describing is not a real problem. This rotating tube across the screen is our DEMO mode of the software. At the same time it is our software protection.
When you connect a purchased MADRIX KEY with DVI output, the cross will disappear. As long as you are running the demo mode, it will stay.
Thanks!