demo software dmx limitations

Write here what nice effects or shows you have done with MADRIX or ask other users.

Moderator: MADRIX Team

Locked
ManMartin
Posts: 13
Joined: Wed Feb 28, 2007 5:47 am
Location: Spain

demo software dmx limitations

Post by ManMartin »

hello

I have seen that now your demo software sends dmx, I tried with open dmx from enttec to check the configuration of some eurolite tubes.

I want to know the limit of channels and the turn off sequence of the dmx signal and also if the artnet output is also enabled to use it for configuration and setup purposes in the installations before the software is received with the dongle in its dvd package.

cheers from malle.
Fritzsche
Support
Support
Posts: 735
Joined: Mon Oct 05, 2009 5:26 pm
Contact:

Re: demo software dmx limitations

Post by Fritzsche »

Hi ManMartin,

The demo version contains the fully functional software. But as you know the data output is restricted.

In demo mode, MADRIX sends data for one hour. But the output is switched off and on again every minute or so during that period (This is totally random and not a fixed interval).

You can use a lot of DMX channels (256 DMX universes) and Art-Net is also enabled, yes.

So, yes, you can create and test the configuration and setup without the dongle.

Regards
Locked