Colour mismatch with ws2801 string
Moderator: MADRIX Team
Colour mismatch with ws2801 string
Hi, i installed a ws2108 based pixel string vir E1.31 protocol and PCB card. Everything is running but i have a colour mismatch. Blue colour in MADRIX gives RED output on the pixels. Does anybody have experience with this problem ? Thx.
Re: Colour mismatch with ws2801 string
Sounds like a channel shift. The adresses of you real fixtures ar one channel higher or two channels lower as like as set up in MADRIX.
LEDs are nothing without control