MADRIX Forum • Modifying separate layer from external controller
Page 1 of 1

Modifying separate layer from external controller

Posted: Fri Sep 13, 2013 5:37 pm
by densant
So i have a project where i have a video wall, wall washers and some planters with light in them I'd like to control those lights separate (I'm already doing from the program with layers) from a external controller is it possible to control a single layer then another one?

Re: Modifying separate layer from external controller

Posted: Mon Sep 16, 2013 7:29 am
by Wissmann
In MADRIX 2 you are able to control which is the selected layer and your are able to control the submaster and the opacity of the selected layer as you can see here
http://help.madrix.com/m2/html/madrix/d ... tocol.html

channel 28 til 33

Re: Modifying separate layer from external controller

Posted: Tue Oct 22, 2013 5:56 pm
by densant
but is there additional control besides opacity and submaster for colors and effects?

Re: Modifying separate layer from external controller

Posted: Tue Oct 22, 2013 8:21 pm
by Wissmann
No, not with the regular remote DMX posibilities.
What you can do is to write a macro which gets the DMX input and set the properties of the effect as you like.