Pre programmed 3D effects
Moderator: MADRIX Team
Pre programmed 3D effects
Hi, i notice there are still no pre-programmed 3D effects present in 3.0 ? You still have to program them from scratch through scripting ?
I was hoping there would be some 3D effects build in ...
Am i wrong ?
Regards,
Marc.
I was hoping there would be some 3D effects build in ...
Am i wrong ?
Regards,
Marc.
Re: Pre programmed 3D effects
Hi Marc,
Large parts (not all) in MADRIX 3 are about 3D and so the answer is short: Each and every effect in MADRIX 3 is ready for 3D. It is all there and built-right into the software.
Maybe this will help?
http://help.madrix.com/m3/html/madrix/h ... or_3d.html
For example, configure a virtual 3D LED matrix and choose SCE Wave / Radial. Now, click on "Front" and choose any of the modes that say "3D".
Let me know if you need anything else. Thank you!
Large parts (not all) in MADRIX 3 are about 3D and so the answer is short: Each and every effect in MADRIX 3 is ready for 3D. It is all there and built-right into the software.
Maybe this will help?
http://help.madrix.com/m3/html/madrix/h ... or_3d.html
For example, configure a virtual 3D LED matrix and choose SCE Wave / Radial. Now, click on "Front" and choose any of the modes that say "3D".
Let me know if you need anything else. Thank you!
Re: Pre programmed 3D effects
Ah,ok will check it out ! I have a Ledwalker DMX usb PRO device connected but it is not recognized by 3.0 any more. Do i have to change specific settings ? In Madrix 2 i could select this device but in 3.0 it's not in the list anymore.