dmx in question for new setup

Write here what nice effects or shows you have done with MADRIX or ask other users.

Moderator: MADRIX Team

Locked
stuartm
Posts: 2
Joined: Thu Feb 20, 2014 9:29 pm

dmx in question for new setup

Post by stuartm »

Hey i just picked up a madrix plexus to run 14 Chauvet led pix bars for my stage setup.

My question is i would like to use the dmx in function to trigger cues for the led bars on the back wall, as i have many other lights i still need a normal dmx setup to run that.

What is compatible with madrix for dmx input, or can i use anything. Does it have to be software based or can i use a console to output dmx to a port on the plexus?

Look forward to learning a lot on here.

THanks
Stu
User avatar
Wissmann
Developer
Developer
Posts: 774
Joined: Fri Feb 23, 2007 3:36 pm
Location: Germany
Contact:

Re: dmx in question for new setup

Post by Wissmann »

Hi,
.
some questions, did you run the led pix bars with the MADRIX Plexus in the stand alone mode or by the MADRIX software thru the Plexus?
.
How many DMX Ports of the Plexus you need to run the 14 Chauvet fixtures?
LEDs are nothing without control ;-)
Locked