Sphere area

Write here what nice effects or shows you have done with MADRIX or ask other users.

Moderator: MADRIX Team

Locked
Arnage
Posts: 11
Joined: Thu Oct 29, 2015 10:01 am
Location: Saint Petersburg, Russia

Sphere area

Post by Arnage »

Hello! I have a project where all fixtures wii be place on sphere. Do you have any experience in it? How i need create the patch?
Fritzsche
Support
Support
Posts: 735
Joined: Mon Oct 05, 2009 5:26 pm
Contact:

Re: Sphere area

Post by Fritzsche »

Hi Arnage!
.
Will the fixtures be placed on the outside of the sphere (2D) or will they also be placed inside the sphere to create a 3D object?
.
Please feel free to contact us at info[at]madrix.com to discuss the details of your inquiry.
.
Thank you very much!
Arnage
Posts: 11
Joined: Thu Oct 29, 2015 10:01 am
Location: Saint Petersburg, Russia

Re: Sphere area

Post by Arnage »

It's a part of building. The fixtures will be placed on the outside. I don't know is it right use 2D mode if i need show video and earth view. I think in this way we will have some inconsistencies.
Fritzsche
Support
Support
Posts: 735
Joined: Mon Oct 05, 2009 5:26 pm
Contact:

Re: Sphere area

Post by Fritzsche »

Hi Arnage,
.
If you can, please send us drawing and more information by e-mail to info[at]madrix.com
.
This would help us help you.
.
If you need to show videos, you will need to patch everything in 2D for sure. And then you will have to decide where to start and where to end. The sphere would be folded back (just as you can fold back a dice in 2D and it will be 3D when put together)
.
We are looking forward to hearing from you!
Arnage
Posts: 11
Joined: Thu Oct 29, 2015 10:01 am
Location: Saint Petersburg, Russia

Re: Sphere area

Post by Arnage »

I sent information by email.
Locked