please help madrix 3 using butler 2 ecue net

[ajiramadhan13]

i want to ask whether some of you guys ever use BUTLER S2 Traxon DMX ??

at this time i use the E:NET system by ECUE with ECUE software,
and now i want to change the ECUE software to MADRIX 3. is that possible using the ENET from ECUE system with MADRIX 3 software ?

have anyone ever tried ? or any suggestion ? i do really need the explain ASAP.. thx

[Fritzsche]

Hi!

I am sorry to say that, but this is not possible.
The Butler S2 is not supported.

MADRIX 3 had initial support for the first generation of Butlers via e:cue's e:net. Please also see here: https://www.madrix.com/support/forum/13/1788

Thank you.

[ajiramadhan13]

ok,, i'm hopeles with BUTLER s2..

but can we go with same fixtures.. we use TRAXON NANO LINER ALEGRO AC XB,, can u suggest me,, what DMX can control thix fixtures so we can use MADRIX 5.. thx before

[Fritzsche]

The TRAXON NANO LINER ALEGRO AC XB seems to be a regular DMX512 fixture.
Which kind of power supplies/controllers are used in addition to the Butler S2?
Can DMX512 be easily used and connected?


If the fixtures and system are fully compatible with DMX512, you are free to use MADRIX hardware products for DMX512, such as

MADRIX LUNA 8,
MADRIX STELLA,
MADRIX PLEXUS,
MADRIX USB ONE.

In general, the MADRIX 5 Software supports the following industry standards for output.
You can directly connect to a wide range of LEDs and compatible first-party or third-party LED controllers.

DMX-Based Output
– Art-Net I, II, 3, 4 (Unicast & Broadcast)
– DMX512
– Philips Color Kinetics KiNET (V1 / V2)
– Philips Hue
– SPI (via MADRIX NEBULA )
– Streaming ACN (sACN / E1.31) (Unicast & Multicast)

DVI-Based Output
– ColourSmart Link
– Colorlight A8
– Colorlight 5A
– Colorlight T9
– DVI (VGA, HDMI, etc.)
– Eurolite T9

Even more options are available via converters or bridging tools.