VIDEO on 3D LEDs
-
poseidon97
- Posts: 1
- Joined: Thu Dec 12, 2019 5:15 am
VIDEO on 3D LEDs
Hi guys
Our other thread has gone a little quiet and we urgently need some help please!
After learning that to make a video appear on a 3d cube, we needed to make a video that was all the layers layed out horizontally, we did that. So in our case, our LED cube is 16 pixels high, with 16 layers. So we made a video 16 pixels high by 256 pixels.
When we load it in there are 2 issues - some videos work and some dont, though we can determine what the difference is. All the videos are AVIs - and we have tried frame rates at 25, 5 and 1 fps. Any definition of the video format, or clues to special tricks here gratefully received.
Secondly, when we have had a video success, it loads, we slice it so that each LED slice corresponds with its correct part of the video file, however it plays so incredibly slowly its almost not playing at all.
Our other thread has gone a little quiet and we urgently need some help please!
After learning that to make a video appear on a 3d cube, we needed to make a video that was all the layers layed out horizontally, we did that. So in our case, our LED cube is 16 pixels high, with 16 layers. So we made a video 16 pixels high by 256 pixels.
When we load it in there are 2 issues - some videos work and some dont, though we can determine what the difference is. All the videos are AVIs - and we have tried frame rates at 25, 5 and 1 fps. Any definition of the video format, or clues to special tricks here gratefully received.
Secondly, when we have had a video success, it loads, we slice it so that each LED slice corresponds with its correct part of the video file, however it plays so incredibly slowly its almost not playing at all.
Re: VIDEO on 3D LEDs
Hello poseidon97,
Welcome to the MADRIX forum.
To give you a detailed answer what is going wrong, we are in need to analyze the files. Can you please send us the used MADRIX setup, a MADRIX logfile and also the created 3D videos via e-mail to info[at]madrix[dot]com?
To save the Setup go to "File > Save Setup as..." and enter a name.
Please go in MADRIX to "Tools > Logfile", click the button "Save As..." and enter a name for the Logfile.
Welcome to the MADRIX forum.
To give you a detailed answer what is going wrong, we are in need to analyze the files. Can you please send us the used MADRIX setup, a MADRIX logfile and also the created 3D videos via e-mail to info[at]madrix[dot]com?
To save the Setup go to "File > Save Setup as..." and enter a name.
Please go in MADRIX to "Tools > Logfile", click the button "Save As..." and enter a name for the Logfile.