Help!! No Output??

Write here what nice effects or shows you have done with MADRIX or ask other users.

Moderator: MADRIX Team

Locked
milfriez
Posts: 28
Joined: Tue Apr 26, 2011 8:34 pm

Help!! No Output??

Post by milfriez »

I have a legit key of Madrix, I am trying to setup my Chinese Eurolite T9 (huasantech) -- I dont have any DVI output at all in Madrix. I set everything up and defined the matrix, but nothing appears.

Whats going on?
User avatar
Wissmann
Developer
Developer
Posts: 774
Joined: Fri Feb 23, 2007 3:36 pm
Location: Germany
Contact:

Re: Help!! No Output??

Post by Wissmann »

mostly this happens if you have used DMX fixtures instead DVI fixtures for your patch. Check this out.
LEDs are nothing without control ;-)
milfriez
Posts: 28
Joined: Tue Apr 26, 2011 8:34 pm

Re: Help!! No Output??

Post by milfriez »

Yes, that was part of the problem. I was in such a hurry to get it up and working I overlooked that. Also, instructions said to setup running LEDshow first, then minimize and then run Madrix on top. Once that happened all i saw was blinking and flickering.

After spending an hour with the tech online, I realized that Madrix could be setup by itself using Eurolite T9 settings, proper matrix size, and also setting to DVI setting. Originally i had it configured that way, but had to change the matrix size, and forgot to reset from DMX to DVI.

Thanks for the help though.
Locked