Multiple LED Tubes Acting As One (Not Individually)

Write here what nice effects or shows you have done with MADRIX or ask other users.

Moderator: MADRIX Team

Locked
Peejoir
Posts: 10
Joined: Fri Apr 13, 2018 12:37 pm

Multiple LED Tubes Acting As One (Not Individually)

Post by Peejoir »

Hi, I'm new to all this, so apologies for any of my ridiculous questions.

I have 28 DMX512 64LEDs 16Pixels in a kind of cube formation. At the moment I have the Luna 4 using 3 DMX universes. I've been testing out some of the stock patches, but all of the tubes in each universe act as one tube, displaying the same pixels. I'm sure this is an addressing issue.

I've used the highlight tool on the patch editor, and the 10 tubes on universe 1 all light up when selecting just one tube on the Madrix display. It's the same for universe 2 and 3.

What should my next step be?
Fritzsche
Support
Support
Posts: 735
Joined: Mon Oct 05, 2009 5:26 pm
Contact:

Re: Multiple LED Tubes Acting As One (Not Individually)

Post by Fritzsche »

Can you please check if there is a way to address each tube individually?
With DMX512-based fixtures, the fixtures themselves need to be addressed correctly and each have their own DMX address in order to work correctly.
Peejoir
Posts: 10
Joined: Fri Apr 13, 2018 12:37 pm

Re: Multiple LED Tubes Acting As One (Not Individually)

Post by Peejoir »

I was told by the UK supplier of MADRIX that the software addresses the tubes, itself. Might I have to buy a separate DMS address writer then?

Is it not possible from within MADRIX software?
Gordon Lights
Posts: 22
Joined: Tue Feb 01, 2011 4:49 am

Re: Multiple LED Tubes Acting As One (Not Individually)

Post by Gordon Lights »

Unless the DMX profile of your tubes has provisions for remote addressing that can be triggered via DMX, I don't see how Madrix could do that. Every DMX tube we've ever come across required the use of an address writer.
Peejoir
Posts: 10
Joined: Fri Apr 13, 2018 12:37 pm

Re: Multiple LED Tubes Acting As One (Not Individually)

Post by Peejoir »

Thanks for the info. Much appreciated!
Peejoir
Posts: 10
Joined: Fri Apr 13, 2018 12:37 pm

Re: Multiple LED Tubes Acting As One (Not Individually)

Post by Peejoir »

Case solved. I got an addresser and it's all working perfectly, now.
Locked