Fixture configuration

Write here what nice effects or shows you have done with MADRIX or ask other users.

Moderator: MADRIX Team

Locked
gherd
Posts: 8
Joined: Fri May 07, 2010 1:11 am

Fixture configuration

Post by gherd »

I have 2 rows of 71 lights in each. I would like to have the same effect applied to each of the 2 rows. for example, if i assign a 'volume meter' effect, i want both rows to show the show in parrellel.

_______________ 1 to 213 (dmx address)
_______________ 214 to 426 (dmx address)


I have tried using the patch generator and cant seem to figure it out.

Thanks.
User avatar
Wissmann
Developer
Developer
Posts: 774
Joined: Fri Feb 23, 2007 3:36 pm
Location: Germany
Contact:

Re: Fixture configuration

Post by Wissmann »

;-) no big deal for MADRIX.
.
Patch your fixtures 71 for x by 2 for y, so you get your two rows.
Now select the effect of your mind and step into the map dialog. There select the top half section for tile (on the right side of the map dialog) than select repeat for the tile option at the bottom of the tile section within the map dialog.
.
That´s it !
LEDs are nothing without control ;-)
gherd
Posts: 8
Joined: Fri May 07, 2010 1:11 am

Re: Fixture configuration

Post by gherd »

We are rocking now.. Thanks for all the help.
User avatar
Wissmann
Developer
Developer
Posts: 774
Joined: Fri Feb 23, 2007 3:36 pm
Location: Germany
Contact:

Re: Fixture configuration

Post by Wissmann »

You are welcome, and thank you for the feedback.
LEDs are nothing without control ;-)
Locked